WELDED VERSION SIDE - Stainless Drain tube / pickup kit

INSTALL INSTRUCTIONS HERE

Standard option comes with a compression adapter to attach to a weldless setup with a coupling (female) 1/2" NPT Thread.  Only leave it off if you are changing to a different pickup tube.

MALE NPT THREADS REQUIRE WHITE OR YELLOW PTFE (TEFLON) PLUMBERS TAPE BEFORE ASSEMBLY.   YOU WILL GALL (BOND) THE THREADS WITHOUT IT.

NOTE: Please specify how the coupling is welded into your kettle.  If its welded flush to the inside wall select "welded flush to inside wall".   If welded in the middle of the coupling select "welded at middle"

The Side pickups can be used with a sankey keg or a flat bottom kettle.

Typical use is in a boil kettle or a flat bottle kettle.  If you use an immersion chiller this can help you keep the hop debris and break material in the middle portion of the keg.