3" face Thermometer with 6" Long stem

If you will install this directly through the wall of a keg or kettle you will need an install kit sold  here.

PLEASE NOTE THAT THERMOMETERS HAVE A GLASS LENS BUT THEY MUST BE PROTECTED FROM DIRECT FLAME EXAUST

3 inch face - 6 inch Stem

Specifications:Dial Size: 3" Case, Stem: 304 Stainless  Steel
Connection: 1/2" NPT.    Accuracy: 1% of full scale
Dual Scale  - Celcius Fahrenheit   calibration screw
Requires a 13/16" or 7/8" step bit or hole saw to install.

Scale will be from 0-220

Back of the thermometer:  Thread is 1/2" male NPT (national piper taper)

Suggested stem length:

2.5" -  Boil kettles when using immersion chillers
4" or 6" - Mash tuns and Hot liquor tanks. 
6" -  THERMOMETER SIGHT GAUGES - will leave 3" of stem in  the kettle / keg.